203 St George St, Moncton (506) 854 4600
Cart 0
Bonza 24 BF RDA

Vandy Vape

Bonza 24 BF RDA

$49.99

Vandy Vape's and The Vaping Bogan introduces their Bonza 24 BF RDA, a bottom fed dripping atomizer with a gold plated dual post quad terminal style building deck, a stepped airflow system, measuring at 24mm diameter and dual or single coil capability. The Bonza 24 has a 7mm deep juice well with centralized juice splitter for even juice distribution, as well as stepped airflow system for a smooth inhale. The gold plated dual post deck has four terminals, the outer terminals secure the coil through a top slotted flathead screw while the inner terminals utilize a unique clamp-style mechanism, making the Bonza easy to build. The Bonza 24 uses the popular 810 drip tip system and comes with an ULTEM wide bore drip tip, a resin wide bore drip tip, a delrin wide bore drip tip, and a 510 drip tip adapter. The golden 510 pin can be changed to a squonk-ready pin for any bottom-feeding device. The Vandy Vape Bonza 24 BF RDA was designed for maximizing flavor and vapor production in an easy to build design for anyone looking for a smooth and stylish rebuildable atomizer.

Product Features
  • 24mm Diameter
  • Dual Post Quad Terminal Style Build Deck
    • Outer Terminals
      • Top Secured with Slotted Flathead Screws
    • Inner Terminal
      • Unique Top Secured Clamp Style Mechanism
    • PEEK Insulator
    • 7mm Deep Juice Well
    • Gold Plated Deck and Screws
    • Juice Flow Splitter in Center
  • Stepped Airflow Design
    • 15 Air Holes Per Side
      • Fully Closeable
  • Gold Plated 510 Contact
    • Squonk-Ready 510 Pin
  • 304 Stainless Steel
  • 810 Drip Tip
    • 17.5mm Bore ULTEM Drip Tip
    • 16mm Bore Delrin Drip Tip Included
    • 18mm Bore 810 Resin Drip Tip
    • 510 Drip Tip Adapter Included
Package Contents
  • One Vandy Vape Bonza BF RDA
  • One ULTEM 810 Drip Tip
  • One Delrin 810 Drip Tip
  • One Resin 810 Drip Tip
  • One T-Tool
  • One 510 Drip Tip Adapter
  • One Bottom Feed 510 Pin
  • Spare Part Pack
  • User Manual

Due to the nature of this product, there is no warranty. This product is for experienced users and requires technical knowledge in order to properly use it.


Rebuildable atomizer: The user of this atomizer must install wick and wire (coil) in order to use it. This atomizer is not pre-installed with a coil. Installation is required. Wick, wire, and mesh sold separately.



Important Note:
Rebuildable atomizer coils and wicks have known risks.

Rebuildables are for experts, not average or beginner vapers with no multimeter or knowledge of how to use a meter, or when a meter must be used, or how electronic devices work. These materials cannot safely be used by the inexperienced or those without basic knowledge of electronics.

This is because:

1. A rebuildable coil/wick MUST be tested carefully with a meter before it is used.
2. If it is not tested it is entirely the risk of the user.
3. Faulty wicks/coils WILL blow electronic devices.
4. New coil/wick units must be tested and then used first on a strong basic electrical APV that has short circuit protection.
5. No new coil/wick assembly should be used on an electronic device until known to be safe.
6. These items destroy electronic devices if faulty. This is a known issue. 

metrovapeshop.com will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a LI-ION battery. Please have a basic understanding of the batteries you are using and how to care for them properly.


Share this Product


More from this collection