The KBOX was Kangertech’s first Box Mod. The Kanger KBOX makes uses of an aluminum chassis to provide you with a lightweight, but durable experience. Its compact size makes it very portable. The KBOX has an ergonomic design that is meant to be comfortable in your hand throughout the day.
The Kanger KBOX features a simple wattage setting that may be adjusted from 8W, 13W, 20W, 25W, 30W, 35W or 40W. The KBOX is easily adjustable to your personal preference with a simple press of a button. The KBOX can fire all atomisers 0.4 ohms and higher. The Kanger Subtank series and Aspire Atlantis are highly recommended with the KBOX. The sleek aesthetics of the KBOX compliment these tanks perfectly.
The Kanger KBOX features a heat dissipation hole, short circuit, and over-current production. The KBOX is 510 threaded and requires 1x 18650 high amp battery. The battery is easy to replace due to the twist-off tail cap.
Features and Specs:
Dimensions: 3-1/2″ x 1-5/8″ x 3/4″ to 1″
Minimum coil resistance: 0.4 ohms
Adjustable wattage settings (8W, 13W, 20W, 25W, 30W, 35W or 40W)
On/off – press the power button 5 times within 3 seconds to turn the device on or off
Low voltage protection
Low resistance protection – If the coil is less than 0.4ohm, the power light will flash 3 times and disable any output
Short circuit protection – If a Short is detected, the power light will flash 3 times and disable any output
Reverse battery protection
Low battery warning
10 second cut off safety feature – If the power button is held for more than 10 seconds, the power light will flash 3 times and disable any output
Twist-off tail cap
Utilizes one high amp 18650 battery (Sold Separately)
Requires a battery charger as batteries cannot be charged internally